How to clean a dehumidifier? (+ 14 simple maintenance tips)

What should you do to make your dehumidifier works for a long time and without problems?

Let’s start from the basics: a household dehumidifier is designed to remove excess moisture and normalize a comfortable level of humidity in a house. It eliminates dampness, mold, and fungus in apartments, private homes, offices, and other domestic premises. In order to extend the life of your dehumidifier, routine maintenance should be performed on a regular basis.

How to Clean a Dehumidifier

The job isn’t hard at all when it comes to cleansing a dehumidifier. You should know that every component has to be cleaned up including the filters, the water reservoir, and also the system’s exterior. Below are six straightforward steps that can obtain the task done easily if it’s your very first time cleansing a dehumidifier.

1. Disconnect Your Dehumidifier

Before you begin or perhaps bring a damp cloth near it, see to it to switch off your dehumidifier and also disconnect it from the power outlet. Doing so will certainly guarantee that the system is completely safe to tidy whether you simply want to clean it down promptly or you want to clean all the specific parts extensively.

2. Wipe the Exterior

Humidifier functions effectively to remove all the potentially hazardous things present airborne. Its exterior, or much better understood as the outer shell, works as the first line of defense in between the dirty air it tries to gather and also the internal components of the dehumidifier.

So once you’re sure that your dehumidifier is unplugged, make use of a dry cloth to wipe off the gross elements like dirt as well as gunk that has actually accumulated on the outside. If it is exceedingly unclean, after that utilize a damp cloth.

However, keep in mind that you shouldn’t spray water or cleaning solvents on it straight at any time. This could damage the device and also cause it to cease to work.

3. Clean Out the Reservoir

The water collection container, or storage tank, of your system should be emptied often to wait from potentially destructive elements. However, it’s much better to take an action even more and also tidy it utilizing warm water and soap or just a disinfectant.

Mildew and also mold tend to accumulate fairly swiftly, as well as when they make their means inside the tank, they are spread into the air and also can spread out diseases. Because of this, it is better to have it cleaned extensively when every 3 weeks, specifically if it’s in regular use.

Merely pour in liquid soap into the storage tank along with water. You might additionally utilize vinegar to break up hard water down payments or stubborn dirt during this action.

4. Rinse the Air Filter

The air filter is the component which does all the magic and also if you have a filthy filter, your dehumidifier won’t work at all. So, to clean up the filter, remove it from your dehumidifier as well as inspect if it has actually been harmed or if there are any kind of blockages.

If you believe that the filter is usable, after that you can get begun on cleansing it. For that, make an option of a gentle detergent and also warm water.

5. Vacuum

Simply to ensure you obtain all of the fragments and have your dehumidifier unit totally tidy, you can vacuum it. Just get hold of a vacuum attachment and also get rid of any kind of remaining dirt that you can find. You can additionally vacuum the filter prior to washing to obtain any loose dirt off.

6. Remove and Clean the Bucket Filter

Your unit might not always have a bucket filter. This filter helps to catch the stray impurities in your dehumidifier. Compared to the main air filter, this is smaller and is nearly the size of a thimble. It is typically embeded the tank, however you can examine your system’s customer guidebook to ensure that your dehumidifier is fitted with one. Just rinse it making use of warm water if a bucket filter is present. Once it’s completely dry, return it to its area.

Just How to Clean a Dehumidifier Coils

1. Unplug the Unit

Turn the dehumidifier off and disconnect it from the power outlet.

2. Dismantle the Parts

It can be a pain, yet uncoupling the device’s surface is the very best way to gain access to as well as tidy the dehumidifier coils.

To enter, unscrew the back, front and also side screws to remove the back as well as front covering, as well as the deals with will come right off.

Remove the follower blade housing to work through the elements by loosening the air intake vents.

3. Clean with Uncompressed Air

Spray uncompressed air over the coils to get the surface dirt and also dust out.

4. Tidy with a Dry Wire Brush Gently

Scrub with a wire brush securely if your coils are baked in dirt and also crud. Be careful with the fins and also brush in their instructions to stay clear of bending them.

5. Rinse the Coils Using a Solution of Dish Soap and also Water

Safeguard the electric motor from water and tidy the coils with water as well as mild soap.

6. Soak in Warm Water

Saturate the coils in warm water as well as allow it go for a couple of hrs for all the dirt to come out.

7. Dry in the Sun

Weep in the sun to completely dry and placed it back in.

How to Clean a Dehumidifier Filter

1. Take the Bucket Out

Take the water bucket off the device to give way to the air filter.

2. Pull the Filter Out From the Panel’s Bottom

You ought to discover a port on the panel to fit your fingers in. Simply draw the panel down, and also the air filter will certainly slip out from all-time low.

3. Rinse it Under Warm Tap Water

Tidy the air filter by cleaning it under a warm tap until all the dirt and also dust wash out.

4. Dry Accordingly

Dry it with a towel or leave it imaginable as well as fit it back in. Changing a damp filter may encourage mold and also mildew development.

How to Clean a Dehumidifier Bucket

1. Remove the bucket from the dehumidifier

Remove the water bucket from the unit as well as vacant the water in it.

2. Fill it with Water and Detergent

Load the pail midway with clean water and just enough dish soap to develop a mild detergent.

3. Brush the Dirt Off

Swish the water and also scrub with a soft-bristle brush gently, then empty and also rinse it.

4. Soak in a Solution of Chlorine Bleach and Water

Load the bucket with a combination of half a mug of chlorine bleach as well as water. Once more, swish the bleach option and also enable it to choose about 15 minutes.

5. Pour out and Rinse

Pour out the bleach solution and also rinse with tidy water and replace it in the device after drying it entirely.

Simple maintenance tips

Here are 14 simple tips to keep your humidifier working effectively and keep a normal indoor air quality.

If your dehumidifier has not yet been used:

After purchasing a residential dehumidifier, do not immediately turn the unit on. It is necessary to let a few hours pass before you can plug it in. This is to allow the refrigerant in the system to stabilize.

Before connecting a household dehumidifier to the mains, make sure the socket is in order and that its power corresponds to the capacity used by the dehumidifier.

The domestic dehumidifier should be used strictly in an upright position.

Do not use your dehumidifier in places where there are chemicals in the air, as they might cause the device to malfunction if they come into contact with the walls of the heat exchanger.

The dehumidifier should be placed at least 0,5 m away from a wall or any other object (sofa, bedside table, etc.) to work properly.

If the dehumidifier has already been in use:

Make sure the equipment is not exposed to water or other liquids. If something like that gets on the unit, it could malfunction, or worse, give you an electric shock.

Carry out a visual inspection of the internal components of the unit for dirt. After removing the air filter, shine a flashlight into the opening of the unit. If the dirt is minor, you can do the cleaning yourself. You can clean the housing and other parts of the equipment with a cotton cloth. Then reinstall the air filter.

If the dust layer is thick and the contamination of the internal components is significant, we recommend that you seek help from the service specialists.

If your dehumidifier is used regularly, you should periodically clean the filter. Usually, the filter is cleaned under a small water pressure or with a vacuum cleaner once in 2 weeks (the air filter must be removed from the device in advance).

Always disconnect the dehumidifier from the mains by removing the plug from the socket before carrying out service work.

It is worth making sure that the main cable is not damaged. It is not recommended to place heavy objects on it, twist it, bend it or expose it to heat.

Pay attention to the container for collecting condensate. If the unit is not used for a long time and some liquid remains in the tank, mold or fungus may form. It is recommended to wash the tank from time to time with detergents.

Do not put anything on top of the dehumidifier, do not cover the air intake grilles and do not sit on it while the dehumidifier is running. Try to place your dehumidifier according to the manual, about half a meter away from the wall.

Operate your dehumidifier at normal temperature and humidity levels. All of these conditions are listed in the manual.

If your dehumidifier won’t start or doesn’t respond to the sensor or buttons, don’t try to repair it yourself. Contact our customer service immediately.

Do not neglect to read the manual, as it contains all the information you need to take care of the appliance!

For more information, please refer to the instruction manual of your particular model of domestic dehumidifier. Study it thoroughly, read about the commissioning sequence, the storage and transportation conditions of your dehumidifier.

As a rule, the manual always contains information about the list of necessary maintenance operations and, most importantly, about the frequency of service activities for the dehumidifier.

Pay attention to the information the dehumidifier displays. Almost all more or less modern dehumidifiers have a self-diagnostic function, and in case of any failure, it will display an error code.

The explanation of such error codes and the corresponding solutions to such issues can be found in the manual, in the “troubleshooting” section.

If the manual does not tell you how to solve the problem yourself, contact customer service immediately.

Leave a Comment